[Back to TullyRunners Home Page]

 PHOTOS - Barton Hall, Cornell University
 ....... (photos taken Jan 2006) 

 

Some info from the Cornell University Athletic web-site (and other sources) ...The Barton Hall track facility contains a flat 200 meter track with eight 42-inch lanes (it is one of the few indoor 200-meter tracks in the country with eight such lanes) ... The track is a Recaflex track, meaning the base layer of the track is constructed with SBR rubber and polyurethane binders and surface is a coating of EPDM rubber and polyurethane (e.g. Recaflex's multi-layers of polyurethane are mixtures of polyurethane & rubber granules) ... The track itself has a raised aluminum curb and a common finish line (the entire surface was replaced in early 2001).

Barton Hall contains a throwing cage with a cement circle and crusher dust landing sector surrounded by a 25-foot high chain link fence ... The interior of the track has a Recaflex runway for the pole vault, two long and triple jump pits and multiple high jump areas.

The permanent seating capacity is reported as 4800 ... however, that probably include a section of roll-out bleachers (similar to high school gyms) located near first-turn that is not totally usable for track meets.

 

Click photos or links below to enlarge photo...

 Looking down the Finishing Stretch  
 Looking down the Back Stretch  
 Looking at the Turn entering the Back Stretch & Back Stretch Seating  
 View of far side jumping pit ... View of seating areas  
 Looking Up the Finishing Stretch